Canon BJC-6000 Manual do Proprietário descarregar pdf

BJC-6000 Series Setup Instructions

Step 1: Remove All Shipping Tape and Protective Materials

Note that tape may not be in the exact locations shown here.

Remove all tape and material from the front, back, and inside of the printer.

Make sure you have these items:

• BC-31 Color BJ Cartridge

• BC-30 Black BJ Cartridge

• Documentation kit (User's Manual, Warranty Card, Registration Card)

• Canon Creative Pro CD packet

• Printer cable (not included)

Check the outside of your box for other contents.

Important! Save the box and shipping materials. You may need them later if you have to transport the

printer.

Step 2: Select a Location for the Printer

• Choose a flat sturdy surface with enough space around the printer to store and feed paper.

• Avoid placing the printer in direct sunlight.

• Fully extend the paper support and paper output tray to ensure enough space is available for proper

operation.

• Make sure you have enough room to manually feed single sheets of paper from the back of the printer

• Always lift the printer by gripping both sides.

1 2 3 4 5 6 7 8 9 10

Resumo do Conteúdo

Página 1

BJC-6000 Series Setup Instructions Step 1: Remove All Shipping Tape and Protective Materials Note that tape may not be in the exact locations shown h

Página 2 - Step 4: Plug In The Printer

Step 8: Install The Printer Driver Important! You must install the BJC-6000 Series Printer Driver for Windows. The printer driver controls the communi

Página 3

Step 3: Connect The Printer To The Computer Important! Make sure the printer and your computer are turned off. 1. Connect a parallel cable to the prin

Página 4

Step 5: Install The BC-31 Color BJ Cartridge Important! Spilled ink can stain any surface. Open BJ cartridges and Ink Tanks very carefully to protect

Página 5

4. Remove the BC-31 Color BJ Cartridge from its box. Remove the orange protective cap from the print head, and then remove the orange tape. Do not att

Página 6

7. Insert the Ink Tank. • Insert the BCI-3Y (Yellow) Ink Tank into the first slot on the right side of the BJ cartridge. • Gently press down on the

Página 7

Step 6: Install The BC-30 Black BJ Cartridge 1. Raise the blue lock lever on the left side of the cartridge holder. 2. Remove the BC-30 Black BJ Car

Página 8

3. Insert the BJ cartridge. • Set the BC-30 Black BJ cartridge into the left slot of the cartridge holder. • Lower the blue lock lever on the left s

Página 9 - Step 7: Load Paper

5. Insert the Ink Tank. • Insert the BCI-3BK (Black) Ink Tank into the slot in the BJ cartridge. • Gently press down on the top of the Ink Tank unti

Página 10

Step 7: Load Paper 1. Pull up the paper support; then lower the paper output tray and pull it all the way out. Move the paper guide to the left to mat