Canon XC15 Manual do Utilizador descarregar pdf (Página 68)

White Balance

Menus

Table of Contents Index

White Balance

The white balance function helps you to accurately reproduce colors under different lighting conditions. This

function is available when the shooting mode is set to n, “, ‚, or ’.

1 Touch [FUNC.] and then touch [White Balance].

2 Select the desired option and then touch [X].

• When you select [È Color Temperature], [ Set 1] or [ Set 2], set the color temperature or a custom

white balance with the appropriate procedure below before touching [X].

To set the color temperature ([È Color Temperature])

1Touch [ ].

• The color temperature adjustment dial will appear on the bottom of the screen.

2 Drag your finger left/right along the dial to select the desired value.

• You can also push the joystick left/right to adjust the setting.

3Touch [K].

To set a custom white balance ([ Set 1] or [ Set 2])

1 Point the camcorder at a gray card or white object so it fills the whole screen.

2 Touch [ ] and then touch [Set WB].

• During the procedure, Å will flash quickly. When it stops flashing, the procedure is completed and the

setting will be applied on the camcorder.

3Touch [K].

Options

* Indicates a preset white balance option.

NOTES

• You can use the [v Camera Setup] > [2] > [Shockless WB] setting to make the transition look smoother

when you change the white balance settings while recording a clip.

• When you select a custom white balance:

- Readjust the custom white balance if the light source or ND filter setting changes.

- Depending on the light source, Å may keep flashing. The result will still be better than with [ Automatic].

Operating modes:

[ Automatic]: The camcorder automatically sets the white balance for natural looking colors.

[¼ Daylight]*: To record outdoors on a bright day.

[½ Shade]*: To record in shaded places.

[¾ Cloudy]*: To record on a cloudy day.

[¿ Fluorescent]*: To record under warm white, cool white or warm-white-type (3-wavelength) fluorescent

lighting.

[ Fluorescent H]*: To record under daylight or daylight-type (3-wavelength) fluorescent lighting.

[É Tungsten]*: To record under tungsten and tungsten-type (3-wavelength) fluorescent lighting.

[È Color Temperature]*: Allows you to set the color temperature between 2,000 K and 15,000 K.

[ Set 1], [ Set 2]: Use the custom white balance settings to make white subjects appear white under colored

lighting.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 169 170

Sem comentários

Canon XC15 Manual do Utilizador Página 68