Canon SX80 Mark II Manual do Utilizador Página 156
- Página / 168
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
156
Specifications
■ Projector
* 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the characteris-
tics of the LCD panel.
* Using the projector continuously for an extended period of time may accelerate the deterioration of optical parts.
■ Remote Control
Model name SX80 MarkII/SX800
Display system RGB liquid crystal system
Optical system
Color separation by dichroic mirror/polarizing beam splitter and color composition by
prism
Display
device
Type Reflective liquid crystal panel
Size/Aspect ratio 0.55" x 3/4:3
Drive system Active matrix system
Number of pixels/Total Number of pixels 1,470,000 (1400 x 1050) x 3 panels/4,410,000
Projection
lens
Zoom ratio/Focal length/F value 1.5/f=16.6 to 24.8mm/F1.95 to F2.6
Zooming and focusing system Electronic operation/electronic operation (SX80 MarkII: with auto focusing function)
Lens shift 10:0 (fixed)
Light source 230W high-pressure lamp
Screen size (projection distance) 40" to 300" (1.2m/3.9' to 9.1m/12.8')
Number of producible colors 16,770,000 colors (full color)
Brightness* 3,000 lm (at presentation)
Contrast ratio 900:1 (full white:full black, at presentation)
Uniformity* 88% (at presentation)
Speaker 1W monaural x 1
Maximum input resolution 1600 x 1200 dots (compression)
Video signals
ANALOG PC input
UXGA/SXGA+/SXGA/WXGA/XGA/SVGA/VGA (scan rate: horizontal: 15 to 75KHz,
vertical 50 to 85Hz)
DIGITAL PC input (SX80 II) SXGA+/SXGA/XGA/SVGA/VGA
COMPONENT input 1080p, 1080i, 1035i, 720p, 576p, 576i, 480p, 480i
HDMI input (SX80 II) 1080p, 1080i, 720p, 576p, 480p
VIDEO/S-VIDEO (SX80 II) input NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N
Input terminals
ANALOG PC-1/DVI-I IN terminal (SX80 II) DIGITAL PC, ANALOG PC-1 (DVI-I connector 29-pin)
HDMI IN terminal (SX80 II) HDMI (HDMI ver. 1.3)
ANALOG PC-1 terminal (SX800) ANALOG PC-1 (mini D-sub 15-pin)
ANALOG PC-2/COMPONENT IN terminal ANALOG PC-2, COMPONENT (mini D-sub 15-pin)
S-VIDEO IN terminal (SX80 II) S-Video (mini DIN 4-pin)
VIDEO IN terminal Composite (RCA)
USB terminal (SX80 II) USB connection, PictBridge input (USB type A)
CONTROL terminal RS-232C (D-sub 9-pin)
Audio Input terminal Audio signal (stereo mini jack x 3)
Video Output terminal (SX80 II) Analog PC (mini D-sub 15-pin)
Audio Output terminal Audio signal (stereo mini jack)
LAN terminal (SX80 II) Network connection (RJ-45)
Input signals
Digital PC (SX80 II) TMDS (Transition Minimized Differential Signaling)
Analog PC
0.7Vp-p, positive polarity, impedance = 75Ω
Horizontal/vertical synchronization: TTL level, negative or positive polarity
Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance=75Ω
Video
Video:1Vp-p, negative synchronization, impedance = 75Ω
S-video: Separate YC signal, Y: 1Vp-p, negative synchronization, impedance = 75Ω
C: 0.286Vp-p (burst signal), impedance = 75Ω
Component: Separate Y Cb/Pb Cr/Pr signal
Y: 1Vp-p, Negative synchronization, impedance = 75Ω
Cb/Pb: 0.7Vp-p, impedance = 75Ω Cr/Pr: 0.7Vp-p, impedance = 75Ω
Audio 142mVrms, impedance = 47 KΩ or more
Noise (normal mode/silent mode) 35/31dB
Operating temperature 5 °C to 35 °C
Power supply AC 100-240 V 50/60 Hz
Power consumption (normal mode/silent
mode/standby state)
330W/270W/15W (SX80 II) 320W/260W/8W (SX800)
Dimensions 332 (W) x 121 (H) x 340 (D) mm/13.3 (W) x 4.8 (H) x 13.6 (D) in (excluding protrusions)
Weight 5.2 kg/11.4 lbs (SX80 II) 5.0 kg/11.0 lbs (SX800)
Accessories
Remote control, batteries for remote control, power cord, computer connection
cable, component cable, carrying bag, lens cover, string for lens cover, User's Man-
ual, and Warranty Card.
Power supply Two 3.0 V, AAA-size batteries
Operating range About 5 m (16.4') (to infrared remote receiver)
Dimensions 42 (W) x 22 (H) x 135 (D) mm / 1.7 (W) x 0.9 (H) x 5.3 (D) in
Weight (not including batteries) 55 g
- User’s Manual 1
- Major Features 2
- Adjusting the Image Size 4
- Quick Reference Guide 5
- Table of Contents 6
- Safety Instructions 12
- Safety Precautions 13
- AC Power Cord Requirement 16
- Lamp Handling Precautions 18
- Installation Precautions 19
- Before Use 21
- Supplied Accessories 22
- Part Names 24
- ■ Bottom Side 25
- Remote Control 26
- Top Control 28
- Input Terminals 29
- Preparing the Remote Control 31
- Setting Up the Projector 35
- ■ Placing on a Level Place 36
- Projecting an Image 37
- Pedestal 37
- Keystone Distortion 37
- Connecting the Projector 38
- * Connect to the 39
- Outputting an Image (SX80 II) 42
- [COMPONENT] 42
- Outputting Audio to Speakers 43
- Connecting to AV Equipment 44
- Starting Projection 49
- 5 Press the AUTO SET button 50
- ■ Adjusting Image 51
- Auto Setup 52
- ■ Performing the Auto Setup 53
- ■ Types of Input Signals 54
- ■ Selecting an Input Signal 55
- Adjusting Image 56
- Adjusting the Focus 59
- Adjusting Keystone Distortion 60
- Selecting Screen Aspect 62
- ■ Resetting the Image Shift 64
- Selecting Aspect Ratio 65
- Selecting an Image Mode 67
- Turning Off the Projector 68
- Useful Functions 69
- Available During 69
- Blackened Out an Image 70
- Temporarily 70
- Freezing the Picture 70
- Adjusting the Volume 71
- Muting the Sound 71
- Zooming an Image 72
- Showing the Elapsed Time 73
- Projecting Image Without Com 73
- Setting 75
- Functions from 75
- How to Use Menus 76
- ■ Basic Operation of Menu 77
- 4 Select contents 78
- Setting Display Status 79
- Total Dots 81
- Tracking 82
- Selecting a Menu Position 86
- Correcting the Screen Color 86
- Reversing projection 87
- Capturing a Logo (SX800) 88
- No Signal Screen (SX80 II) 89
- Screen When Blank (SX80 II) 89
- No Signal Screen (SX800) 90
- Screen When Blank (SX800) 91
- Setting the Image Quality 93
- Adjusting the Brightness 94
- Adjusting the Contrast 94
- Adjusting the Sharpness 95
- Making a Gamma Correction 95
- Analog PC/USB) (SX80 II) 96
- VIDEO/S-VIDEO) (SX80 II) 97
- VIDEO) (SX800) 98
- Ambient Light (SX80 II) 101
- Reducing the Lamp Brightness 102
- Resetting the Image Settings 102
- Setting Various Function 103
- Enabling/Disabling the Beep 104
- Selecting a Display Language 105
- Setting a Password 108
- Resetting the Lamp Counter 109
- Registering a Password 109
- Information shown 112
- SX80 MarkII SX800 112
- Projecting an 113
- Image from a 113
- Digital Camera 113
- Memory (SX80 II) 113
- Connecting a Digital Camera 114
- Operating the Projected Image 116
- Running a Slideshow 117
- USB flash memory 118
- Remote control Top control 118
- 3 Connect a USB flash memory 119
- ■ Selecting a Drive 121
- ■ Selecting a Folder 121
- Connecting the 125
- Projector to 125
- Network (SX80 II) 125
- Setting Network (SX80 II) 128
- ■ Setting the Network 129
- ■ Error Notification Message 135
- ■ Projector Control 136
- Appendix 137
- Troubleshooting 138
- Symptoms and Solutions 139
- ■ You cannot hear sound 140
- Maintenance 143
- 3 Remove the air filter 144
- Replacing the Lamp 145
- ■ Replacing the Lamp 146
- Flash Memory (SX80 II) 149
- Glossary 152
- Specifications 156
- ■ External View 157
- ■ Service Port (CONTROL) 158
- Menu Configuration 164
- The Image adjustment menu 165
- The System settings menu 166
- The Information menu 166
Manuais e produtos relacionados com Projetores de dados Canon SX80 Mark II
Projetores de dados Canon DR-2050SP Especificações
(29 páginas)
(29 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 2.670 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais