Canon 220P Manual do Proprietário

Setup GuideRead This FirstPlease read this manual before using the scanner.After you finish reading this manual, keep it in a safe place for future re

6❏ About the Fingerprint Sensor (ScanFront 220P only)● The following actions may damage the sensor or cause it to malfunction:– Dropping an object on

7ScanFront Setup OverviewFollow the procedures below to set up the ScanFront 220/220P.1.Checking the Supplied Accessories (See p. 8)Confirm that all o

81. Checking the Supplied AccessoriesAfter unpacking the scanner, confirm that the following accessories are included. In the unlikely event that any

92. Removing the Packing Materials and Attaching the Feed RollerRemove all of the packing materials protecting the scanner, and attach the feed roller

105.Open the roller cover for the feed roller.6. Lift up the roller lock lever a, and slide it in the direction of the arrow b.7. Align the notch in t

1111.Gently close the panel unit. Press on both sides of the unit until you hear a click, which indicates the unit is locked.12.Gently close the docum

123. Installing the Scanner and Connecting to a NetworkBefore setting up the scanner, you need to move it to the installation site, and connect the AC

13❏ Connecting the AC AdapterFollow the procedure shown below to connect the AC adapter.CAUTIONMake sure to use only the AC adapter and power cord inc

144. Turning the Power ON and OFFUse the power switch to turn the scanner ON, and press the [Power off] button on the touch panel to turn it OFF.❏ Tur

155. Configuring the Scanner SettingsTo set up the scanner, you must configure the [Network setting] items under [Administrator setting] on the scanne

European Union (and EEA) only.This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Direct

16❏ Network SettingsFollow the procedure below to confirm and configure the device name and IP address needed to connect the scanner to a network.IMPO

174.Confirm the [Device name] and [IP address].5. Press [Device name] (or [IP address]).A keyboard entry screen appears.Press [Shift] to switch, the e

18❏ Configuring the Date and Time and Confirming the Time ZoneWhen you finish configuring the network settings, log in to the Web Menu to set the date

196.Click [Device Configuration].The [Device Configuration] screen appears.7. Check the [Language/Timezone] setting.HintTo change the setting, click [

20❏ Mail Server SettingsTo send scanned images via e-mail, open the Server Settings screen from the Web Menu and register a mail server. For details,

216. Scanning ProcedureThis section gives an overview of the procedure for sending scanned images from the Home screen.For more details, refer to the

225.Confirm that the selected address has a check mark, and press [Next].The [Scan / Delivery Options] screen appears.6. Confirm the scan settings, an

239.Press [Send].An address confirmation message appears.10.Confirm the address and press [OK] to send the scanned image.The scanner sends the image f

CANON ELECTRONICS INC.1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPANCANON U.S.A. INC.ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A.CANO

libjpegPortions of this software are based in part on the work of the Independent JPEG Group.Copyright 2007 by CANON ELECTRONICS INC. All rights reser

❏ Table of ContentsIntroduction ... 1Manuals for the Scanner ...

1IntroductionThank you for purchasing the Canon imageFORMULA ScanFront 220/220P network scanner. Please read this manual thoroughly before using the s

2❏ Manuals for the ScannerThe following manuals are provided with the Canon ScanFront 220/220P. Be sure to read these manuals thoroughly before using

3Important Safety InstructionsTo ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below.❏ Inst

4● Do not pull directly on the power cord. When disconnecting the power cord, grasp the plug and remove it from the outlet.● Keep the area around the

5 If the scanner makes strange noises, or gives off, smoke, heat, or strange odors, or the scanner does not function or other abnormalities occur whe