Canon MP360 SERIES Guia do Utilizador descarregar pdf (Página 98)

96 Troubleshooting Chapter 11

X Paper Curls

X Outputting Stops In-progress

When Copying Or Printing From A Computer

When Copying

The platen glass or the inside of the

document cover is dirty.

Clean the platen glass and the inside of the document cover.

(See page 89)

Cause Action

You are using thin paper to print. Use 17 lb.–28 lb. (64 g/m

–105 g/m

) paper. (See page 15)

You have set curled paper in the

multi-purpose tray.

Uncurl the paper, then load it into the multi-purpose tray.

You are printing images that use a

large quantity of ink such as

photographs or pictures.

Use thicker paper such as High Resolution Paper or Glossy Photo

Paper.

Cause Action

Paper does not feed properly. See “Cannot Print At All, Cannot Print Correctly,” on page 94.

The machine has been printing

continuously over a long period.

If so, the print head will overheat. To protect the print head, printing

will stop temporarily and resume after a period of time. Interrupt

printing when appropriate, turn OFF the machine, and wait at least

15 minutes.

CAUTION

• The area around the print head may become extremely hot. Do not

touch it under any circumstances.

Cause Action

You are copying documents such

as photographs or illustrations with

fine mode.

If you are copying documents with fine mode, processing the data

will take time, and copying will appear to have stopped. Wait until

data is processed. If you are copying a document with a large printing

area (with small margins) or are copying multiple sets, copying may

stop to allow the ink time to dry.

Cause Action

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 139 140

Sem comentários

Canon MP360 SERIES Guia do Utilizador Página 98