Canon IP ReadyTM Series Video Alarm FDW75C12N Especificações descarregar pdf (Página 64)

For orders please call 888 874 3336 (Branch Locations) or 800 366 4472 (Technical Sales) Visit us on the web at www.tri-ed.com

Speciﬁcations are subject to change without notice. Products may not appear as shown. Trademarks are the property of their respective owners. We are not responsible for any errors or omissions in speciﬁcations and do not warrant the same. © 2014/15

TRANSMISSION

CCTV IP PoE Extender

MUX-500111 MUX-500111*2PK - 2 pack

• Preserve investment in legacy coax

• Ease of migration to IP surveillance

• Connects IP PoE camera to 10/100BaseT PoE Switch via single coax cable

• Up to 1,600 ft (500m) @ 10Mbps @ 7W

• Up to 330 ft (100m) @ 100Mbps @ 14W

• Used in pairs

The CCTV IP PoE Extender allows one IP camera to be connected via a single 75-ohm coax cable in

a point-to-point conguration*. The product works in pairs and the power consumption is low

enough so that it does not load the PoE source or switch. The maximum distance depends on the

grade of coax cable and the power consumption of the camera.

TRANSMISSION

CCTV IP Extender Kit

MUX-500110

• Extend distance between IP camera and 10/100BaseT LAN

• Supports up to two IP cameras

• Cat5e/6 or coax link

• Up to 650 ft (200m) @ 100Mbps

• Up to 1 mile (1.6 km) @ 25Mbps

The CCTV IP Extender Kit allows any CCTV IP camera to be connected over extended

distance via Cat5e or coax cable. The 500110 supports up to two IP cameras up to 650 ft

(200m) at 100 Mbps and up to 1 mile (1.6km) at 25Mbps.

TRANSMISSION

LongReach CCTV IP PoE Extender Kits

MUX-500112 MUX-50011230W - NEW! Use with 30W cameras

MUX-500114 - NEW! Up to 1km!

• Supports one IP PoE camera via one coax cable

• Supports CCTV IP PoE cameras up to 15.4W

• Up to 1000 ft (300m) via coax @ 100Mbps/15.4W

• Up to 330 ft (100m) on the LAN connection

• LED indicators for power, IP trafc, 100Mbps

• Optional 48VDC power supply (500113)

• Includes wall-mount brackets

The Long Reach CCTV IP PoE Extender Kit allows one CCTV PoE IP camera (up to 15.4 Watts) to be connected up

to 1000 ft (300 m) via a single 75-ohm coax cable in a point-to-point conguration to a PoE LAN switch.

TRANSMISSION

3 Port Rackmount Transceiver Chassis

MUX-500905

• Space efcient - 1U height

• One-piece design

• Latching mechanism for secure installation

• Supports up to three transceivers

• Snap-in design for ease of installation

• Includes four (4) rackmount screws and washers

• Slot number silkscreen on front and rear

TRANSMISSION

16 Port Rackmount IP Transceiver Chassis

MUX-500905

MUX-500906 - Powered

• Chassis capable of supplying POE power to all receivers! (model 500909)

• Space efcient - 3U height

• One-piece design

• Thumbscrew mechanism for secure installation

• Supports up to sixteen transceivers

• Includes four rackmount screws and washers (500908)

• Blank ller modules (500907) & additional brackets (500908) sold separately

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 103 104

Comentários a estes Manuais

Sem comentários

Canon IP ReadyTM Series Video Alarm FDW75C12N Especificações Página 64

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Canon IP ReadyTM Series Video Alarm FDW75C12N