Canon S100 Guia de Configuração descarregar pdf (Página 62)

Connecting to a Serial Port (Printer or Modem Port)

The serial port interface is only supported by the PowerShot S10 and PowerShot S20

models.

1. Shut down the computer and turn the camera power off.

2. Attach the supplied serial cable to a serial port on the computer and to

the camera’s DIGITAL terminal as shown below.

• Please consult your computer’s manual for the location of the serial port.

3. Turn on the computer.

About AppleTalk

• When connected via the serial interface using AppleTalk, open the Apple menu ,

select [Chooser] and turn AppleTalk to [Inactive].

PUSH Button

Precaution for Unplugging Cables

from the DIGITAL Terminal

• Always press the [PUSH] button on the

connector to detach the cable from the

camera’s DIGITAL terminal.

Modem Port

DIGITAL Terminal

1. Open the DIGITAL terminal cover

by slipping a fingernail under the

top edge and pulling down.

Serial Connector

2. Insert the connector so that the

marks on

the connector and camera align.

Printer Port

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 83 84

Sem comentários

Canon S100 Guia de Configuração Página 62