Canon iR2200 Guia de Configuração descarregar pdf (Página 47)

Changing the Scanning Ratio (Copy Ratio)

2-21

Scanning Originals into a Mail Box

NOTE

• Place the original on the platen glass if the zoom ratio is more than 400%.

• If you make a mistake when entering values, press “C,” and enter the correct values.

• To set the same values for the X and Y axes, press “Zoom.”

• If you want to enter values in millimeters, press “mm.”

• For details of how to enter values in inches, see the Reference Guide.

Press (Start).

The machine starts scanning. (See ‘Storing Originals in the Mail Box,’ on p. 1-9.)

NOTE

• To return the ratio to 100%, press “Direct.”

• To cancel the setting, press “Copy Ratio” → “Other Zoom”→ “Zoom Program” → “Cancel,”

in this order.

• To cancel all settings at once, press “Initial Settings.” (The machine returns to the standard

scanning mode.)

• To return the display to the Mail Box Selection screen, press (Reset).

Enlarging/Reducing Originals at Scanning Ratios Set

Independently for X and Y Axes (XY Zoom)

If you set the XY Zoom mode, you can scan an original enlarging or reducing it to different

XY scanning ratios. The available scanning ratios are from 25% to 800% when the original is

placed on the platen glass, and from 25% to 400% when the original is placed in the feeder.

IMPORTANT

• You cannot scan highly transparent originals, such as transparencies, in the XY Zoom mode.

Specify the scanning ratio for these originals.

NOTE

• If an error occurs between the XY Zoom scanning and the actual scanning size, then you can

adjust this with the Zoom Fine Adjustment function. (See the Reference Guide.)

Select the desired mail box number to display the Document

Selection screen, and press “Scan.”

When you select a mail box set with a password, enter the password after selecting the

mail box, and press “OK.”

The Scan screen is displayed.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 157 158

Sem comentários

Canon iR2200 Guia de Configuração Página 47