Canon PIXMA iP5200R Guia de Configuração descarregar pdf (Página 45)

Setting Up an Additional Computer to Use a Printer

Already Connected to a Network

This section describes how to enable a client to use a printer that is already connected to a wireless or wired

LAN (setup from another computer is complete). This setup procedure only requires settings to be made on

the client computer.

Perform this setup procedure after installing the software.

Turn on the printer.

Select Setup from the Canon IJ

Network Tool pop-up menu.

When a message appears notifying that

no printer was detected, click OK.

• If MAC or IP address filtering is configured to restrict access to the printer, make sure beforehand

that the details of the client computer you are setting up are also registered.

• Make sure the computer you are setting up is NOT connected to the printer via a USB cable. This

setup procedure does not involve connecting the USB cable.

• For wired LAN connections, confirm that the printer is connected to the network with a LAN cable.

If Canon IJ Network Tool does not start automatically,

select

Applications

from the

menu, double-click

the

Utilities

folder, double-click the

Printer Setup

Utility

icon, and then proceed to step 6.

When using Mac OS X v.10.2.x, double-click the

Utilities

folder, double-click the

Print Center

icon,

and then proceed to step 6.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 75 76

Sem comentários

Canon PIXMA iP5200R Guia de Configuração Página 45