Canon PIXMA iP5200R Guia de Configuração descarregar pdf (Página 64)

Checking the IP

address or the MAC

address of the

computer

To check the IP address or MAC address assigned to the computer, follow the

procedure below.

•

When using Windows XP/Windows 2000

From the Start menu, select (All) Programs, Accessories, and then

Command Prompt.

Enter “ipconfig /all” and press the Enter key. The IP addresses and the

MAC addresses of the network devices installed in your computer are

displayed. When the network device is not connected to the network,

the IP address is not displayed.

•

When using Windows Me/Windows 98

From the Start menu, select Run.

Enter “winipcfg” in the Name text box and click OK.

Select the network device to display the IP address and the MAC address.

From the Apple menu, select System Preferences, and then Network.

From the Show pop-up menu, select Built-in Ethernet.

Selecting the

TCP/IP

buttons displays the IP address. Selecting

AirPort

(or

Ethernet

in the case of a wired LAN) displays the MAC address.

Checking the network

setting information

See “Printing and Initializing Network Settings” on page 69 to print out printer

setting information. If it fails, use Canon IJ Network Tool or Network

Configuration to confirm the network settings from the computer.

Confirming the version

of Windows XP

If you are using Windows XP, you may need to confirm your system version to

configure the network setting of your computer.

To check the version of Windows XP, follow these steps.

Right click My Computer from the Start menu and select Properties.

System Properties

will be displayed.

Confirm that the General tab is displayed.

Confirm your Windows XP version under System.

Problem Possible Cause and Measures

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 75 76

Comentários a estes Manuais

Sem comentários

Canon PIXMA iP5200R Guia de Configuração Página 64

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Canon PIXMA iP5200R