Canon ImageCLASS MF7480 Especificações

ENGStarter GuidePlease read this guide before operating this product.After you nish reading this guide, store it in a safe place for future reference

96Fan the paper stack and even the edges.7Load the paper stack of the appropriate size with the print side facing up.When loading paper, be careful no

109Pull out the paper size plate (A) from the paper drawer.10Stick the appropriate paper size label on the paper size plate.11Reinsert the paper size

11Ax LabelsAx the supplied document size label to the specied location.1Align the slide guide (A) to the original size mark “A4/A3” (B).2Ax the do

12Connect the Power Cord and Turn On the Machine1Connect the supplied power cord (A) in to the socket and the wall outlet.2 Press the main power switc

13Connect Telephone CablesBAConnect the supplied telephone cable (A) to the line jack (B) on the back side of the machine and the wall jack.Set the Da

141 Press (Additional Functions).2 Press [Timer Settings].3 Press [Date & Time Settings].4 Use - (Numeric Keys) to enter the date (month/d

156 Select the time zone in which the machine is located, then press [OK].The standard time zones of the world are expressed globally in terms of the

169 Select the month and day from the Month and Day drop-down lists, then press [OK].10 Press [End Date].11 Select the month and day at which Dayligh

17Set the Telephone Line Type1 Press (Additional Functions).2 Press [Communications Settings].3 Press [User Settings] under <Fax Settings>.4

18Set the Machine for Sending DocumentsGuidelines for Entering InformationBefore sending documents, you MUST register your fax number, and user name (

1Set Up the MachineUnpacking the MachineRemove all shipping tape and packing material from the machine.Remove the vinyl-tie and label attached on the

19Register Sender InformationYou must store your machine’s fax number. This number is printed on the top of every document you send to the recipient.Y

206 Press [Done].7 Press [TX Settings] under <Common Settings>.8 Press [Unit Name].Enter your name or company name (and department name if po

21Set the Machine for Network Usage (imageCLASS MF7480/MF7470 Only)Connect the Machine to a NetworkThis machine has a USB connector and LAN connector

22Specify the IP Address SettingsAn IP address must be specied in order to enable communication between the machine and computer.It is recommended th

236 Press [IP Address Settings]. 7 Press [IP Address], then enter the IP address using - (Numeric Keys).If you specify an IP address using DHCP, B

24Installing SoftwarePerform the following procedure to install the printer and fax drivers. If you install these drivers, you can print and fax from

25Installation Procedure for USB Connection1Insert the UFRII LT/FAX User Software CD-ROM.2If the CD-ROM Setup screen is not displayed, click [start] o

261011Attach the ferrite core (A) as close as possible to the B-type side (square) of the USB cable (B).12Connect the machine and your computer with a

271920Select the USB port you want to use from [Port]. If you want to add a port, click [AddPort] and then select the USB port you want to add.2122232

2828Remove the UFRII LT/FAX User Software CD-ROM.If you are using MF7460, you have now completed installation.29Insert the PCL User Software CD-ROM.(M

2Before Setting Up the MachineWhen carrying the machine, be sure that it is carried by two or more people holding the parts indicated below. The shape

2936Select [Canon MF7400 Series PCL5e] or [Canon MF7400 Series PCL6] .3738Select the USB port you want to use from [Port]. If you want to add a port,

301Connect the machine to the network correctly, and conrm that the power is on.2Insert the UFRII LT/FAX User Software CD-ROM.3If the CD-ROM Setup sc

3110111213141516171819A [Process to Install Fax Driver] dialog box will appear if drivers that can be installed with this Installer are already instal

32202122232425The Color Network ScanGear installation screen appears. Follow the on-screen instructions. 262728Remove the UFRII LT/FAX User Software C

3330If the CD-ROM Setup screen is not displayed, click [start] on the Windows task bar → [My Computer].Windows Vista: click [start] on the Windows tas

3439404142434445Remove the PCL User Software CD-ROM. You have now completed installation.

35Checking the InstallationCheck if the drivers are installed successfully and that the machine is selected as the default printer.If your machine is

36Manual CD-ROM MenuSystem RequirementsThe Manual CD-ROM Menu can be used in the following system environments.Operation SystemMicrosoft Windows 98/98

37Using the CD-ROM MenuThis section describes how to use the CD-ROM Menu. When you insert the User Manual CD-ROM provided into the CD-ROM drive, the L

38TrademarksCanon, the Canon logo and imageCLASS are trademarks of Canon Inc. Microsoft, Windows, Windows Server and Windows Vista are trademarks or

3Do You Have Everything?Machine● Cartridge● Power Cord●Telephone Cable● Ferrite Core for USB Cable● Document Size Label●Starter Guide● Limited Warrant

CANON INC.30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, JapanCANON U.S.A., INC.One Canon Plaza, Lake Success, NY 11042, U.S.A.CANON CANADA INC.6

4Manuals for the MachineStarter Guide (This Document): Machine set-up and software installationBasic Operation Guide: Basic features, maintenance, tro

5Install Cartridge1Remove the cartridge from the bag.2Remove the desiccant bag and the shipping tape.3Remove the short shipping tape.4Remove the packi

67Remove the long shipping tape.8Remove the protective cover.9Push the release button on the left cover of the main unit to open the left cover.10Open

713Hold the cartridge by its handle, then insert it into the cartridge holder.14Push the cartridge holder into the machine as far as it will go.15Rota

8Load Paper1Pull out the paper drawer until it stops.2Push down the metal plate to lock.If you load LTR size paper, go to step 6, or otherwise go to s