Canon MP490 series Manual de Instruções Página 26

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 25
(4)
Media type
Select the media type of the paper to print: Plain paper, Plus Glossy II, etc.
Note
If you do not select the media type correctly, the machine may not print with the proper
print quality.
(5)
Print quality
Adjust the print quality according to the original to copy: Print quality (quality-priority), Print quality
(standard), or Print quality (speed-priority). The available print quality depends on the paper
selected for the media type.
Note
Settings such as the page size, media type, and print quality are retained, and these settings
will appear next time when the copy mode is selected even if the power is turned off and on.
Combination of some items cannot be specified depending on the function.
You can specify the amount of extension in Extension amount under Device settings, when
Borderless copy is selected for the copy type.
If Borderless copy is selected, select A4, 4"x6"(10x15cm), 5"x7"(13x18cm) or 8.5"x11"(LTR)
for the page size and any types of paper except Plain paper for the media type.
If Borderless copy is selected, slight cropping may occur at the edges since the copied image
is enlarged to fill the whole page.
Even if Borderless copy or Frame erase is selected, you can copy with the specified ratio by
selecting a page size. However, if Borderless copy is selected, enlargement/reduction ratio
differs from that when Standard copy is selected.
You can set the print quality to Print quality
(speed-quality) only when Plain paper is
selected for the media type.
If you select Print quality (speed-priority) with the media type set to Plain paper and the
quality is not as good as expected, select Print quality (standard) or Print quality
(quality-priority) and then try copying again.
You can specify Copy auto intensity. This function automatically adjusts the intensity of the
original on the Platen Glass.
See Machine Settings.
Page top
Page 26 of 726 pagesMaking Copies
Vista de página 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 725 726

Comentários a estes Manuais

Sem comentários