Canon MP490 series Manual de Instruções Página 83

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 82
(3)
Confirm that the Ink Cartridge Locking Cover is closed correctly.
Note
If the Ink Cartridge Locking Cover is not closed correctly, push down the Ink Cartridge
Locking Cover until it clicks.
(E) Closed correctly
(F) Not closed correctly (the cover is tilted)
Important
The machine cannot print unless both the Color and Black FINE Cartridges are installed. Be
sure to install both the FINE Cartridges.
6. Lift the Scanning Unit (Cover) slightly to set the Scanning Unit Support back to its
original position, and gently close the Scanning Unit (Cover).
Caution
When setting the Scanning Unit Support back to its original position, be sure to hold the
Scanning Unit (Cover) firmly, and be careful not to get your fingers caught.
Note
If the error message appears on the LCD after the Scanning Unit (Cover) is closed, refer to "
Troubleshooting" in the on-screen manual:
Advanced Guide
.
When you start printing after replacing the FINE Cartridge, the machine starts cleaning the Print
Head automatically. Do not perform any other operations until the machine completes the
cleaning of the Print Head. While cleaning is in progress, the Power lamp is flashing green.
If printed ruled lines are misaligned or the print head position is misaligned, adjust the print head
position.
See
Aligning the Print Head
.
Page 83 of 726 pagesReplacing a FINE Cartridge
Vista de página 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 725 726

Comentários a estes Manuais

Sem comentários