Canon MP490 series Manual de Instruções Página 86

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 85
Advanced Guide
Troubleshooting
Contents
>
Routine Maintenance > Cleaning the Paper Feed Roller
Cleaning the Paper Feed Roller
If the Paper Feed Roller is dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the Paper Feed Roller. Cleaning will wear out the Paper Feed Roller, so perform this
only when necessary.
You need to prepare: three sheets of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
2.
Open the Paper Output Tray gently, and open the Output Tray Extension.
3.
Select Roller Cleaning.
(1)
Press the
Menu
button.
(2)
Select Maintenance, and press the
OK
button.
(3)
Select Roller cleaning, and press the
OK
button.
The confirmation screen will appear.
(4)
Select Yes, and press the
OK
button.
4.
Clean the Paper Feed Roller without paper.
(1)
Follow the message to remove paper in the Rear Tray.
(2)
Press the
OK
button.
The Paper Feed Roller will rotate as it is cleaned.
5.
Clean the Paper Feed Roller with paper.
(1)
Make sure that the Paper Feed Roller has stopped rotating, then follow the
message to load three sheets of A4 or Letter-sized plain paper in the Rear Tray.
(2)
Press the
OK
button.
The machine starts cleaning.
The cleaning will be completed after the paper is ejected.
Note
To perform other functions, select the desired menu on the top menu screen displayed by
pressing the
Back
or
Menu
button.
Page 86 of 726 pagesCleaning the Paper Feed Roller
Vista de página 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 725 726

Comentários a estes Manuais

Sem comentários